Accessories

FOLBE LEVEL BEST BEVERAGE HOLDER - WEDGE MOUNT

Full floating design means no more spilled drinks!

FOX 40 CLASSIC ORANGE WHISTLE

This is the one that changed the game! Fox 40’s first pealess whistle. Authentic. Original. FEATURES: The Fox 40® Classic® is the standard choice referees and coaches at all levels, rescue professionals and general safety...

FOX 40 RESCUE THROW BAG

The Fox 40® Rescue Throw Bag is a highly durable drawstring bag Contain a 50' premium polypropylene woven floating rope with 900 lb (408 kg) breaking strength Throwing and repacking instructions are printed on the back of the bag

HUMMINBIRD 14 M ID SIDB Y SOLIX / APEX SI & 2D SPLITTER CABLE

The 14 M ID SIDB Y cable allows for the installation of a separate 2D transducer paired with a Humminbird MEGA Imaging or non-MEGA Imaging transducer and connect both transducers to a single Humminbird control head. This y-cable provides the ability to...

HUMMINBIRD MHX XNT

The MHX XNT is a plastic mounting bracket and hardware kit for XNT transom-mount transducers. Compatible with: XNT 9 20, XNT 9 20 T, XNT 9 DB 74 T, XNT 9 DI T, XNT 9 HW DI T, XNT 9 HW MDI 75 T, XNT 9 HW MSI 150 T, XNT 9 HW SI T, XNT 14 20 T, XNT 14 74...

LOON UV BOAT REPAIR

UV Boat Repair cures in seconds when exposed to direct sunlight or Loon’s UV lamps, and is the perfect solution to repair pin hole leaks in hypalon watercrafts. Repairs pin hole leaks in hypalon watercraft Cures soft and pliable Instantly cures...

MINN KOTA MKA-43 TELESCOPIC EXTENSION HANDLE (17"-25")

Simply twist the handle to loosen, adjust and tighten our extension handles. Go from 17" to 25" and experience total speed and steering control in any situation. Fits all outboard and trolling motors. Simply twist the handle to loosen, adjust and...

MUSTAD ECO FLOATING KEY CHAIN

Losing keys to the water is all too common and there may be no getting them back. With Mustad's floating key chain, your keys stay just on the surface for easy retrieval. This is not a life-saving device. Buoyant foam Built-in keyring

NRS BLAST 12-V INFLATOR

Why pump by hand if you don’t have to? Let the NRS Blast Inflator Pump do the work for you. Its compact size and rugged durability will last for years. This 12-volt pump is capable of inflating to 2 psi for fast and easy inflation. For many...

OUTCAST DA HAND PUMP

Inflate or top off your kayak, raft, or pontoon boat to the recommended pressure with a double action hand pump.

OUTCAST FINS

Fins are a must for navigating float tubes. Features: Easy step-in fin 2 cinch straps Fits with wader boots Lightweight Collapses down flat Made from tough molded plastic

OUTCAST FLOAT TUBE BAG - GREEN

This is the ideal way to transport and store Outcast and Fish Cat float tubes.

OUTCAST FOOT PUMP

Just use your foot to quickly inflate your Outcast or Fish Cat boat.

OUTCAST HURRICANE 12V INFLATOR

The 12 volt Hurricane boat inflator produces a strong consistent flow of air to quickly inflate boats to 2 psi. It is a hands-free design by virtue of its on/off switch and hose. A variety of valve adapters are also included. Stops automatically when...

OUTCAST OSG REPAIR KIT - LEAFIELD

Outcast repair kits contain the essentials for a potential emergency repair. Make sure you know which valve your boat uses to determine which kit is best for your boat. Repair parts are fitted in a water-resistant case, with gasket-lined lid. This kit...

OUTCAST POWERFINS

Fins are a must for navigating float tubes. Features: Easy step-in fin 2 cinch straps Fits with wader boots Lightweight Collapses down flat Made from tough molded plastic

OUTCAST VINYL TUBING VALVE ADAPTER

Connects your pump adapter to the Outcast Summit valve adapter.

OUTCAST WHEEL SYSTEM

Assists with transporting your Outcast pontoon boat to and from the water.

RAM MOUNT

RAPALA ADHESIVE FISH RULER 36"

Outdoor ready adhesive ruler mounts anywhere on your boat for quick, accurate measuring. Include both inches and centimeter increments. 36" Adhesive Ruler Sticks to any hard surface Inch and Centimeter Measurements

SCOTTY 1 1/4" RAIL MOUNT S245

Fits 1 1/4” round rails Excellent for pontoon boats Provides versatile mounting without having to drill more holes in your boat  Includes stainless steel fasteners that hold this tough mount securely in place Works with all Scotty post mount...

SCOTTY 1" BALL WITH TRACK ADAPTER S158

1″ Ball with Track AdapterAdapt your Scotty low profile track to our 1″ ball mounting system. For use with all Scotty 1″ ball mounts and Scotty low profile tracks.

SCOTTY 1.5" BALL BOUNT WITH FISHFINDER AND UNIVERSAL MOUNTING PLATE S163

1.5″ Ball Mount with Fish Finder & Universal Mounting Plate • The newest edition to our ball mounting system is our 1½” ball mount. • The bigger ball design gives you a much greater clamping force for larger accessories...

SCOTTY 1.5" BALL WITH TRACK ADAPTER S168

•1.5″ Ball with Track AdapterAdapt your Scotty low profile track to our 1.5″ ball mounting system. For use with all Scotty 1.5″ ball mounts and Scotty low profile tracks.

SCOTTY 2.25" BALL MOUNT WITH FISH FINDER TOP PLATE S173

2.25″ Ball mount with fish finder top plate  Arrange your fish finder at the perfect angle on your watercraft with this heavy duty 2.25”  ball mount. Designed for 10”- 12” fish finders. Pre fabricated holes on the...

SCOTTY 3" STICK-ON ACCESSORY MOUNT WITH GEAR HEAD S448

Position your Scotty Rod Holder or Scotty Accessory virtually anywhere on your SUP or flush kayak/boat surface Includes attached Gear-Head Mount which makes it easy to drop and lock a Scotty Rod Holder or post mount product and...

SCOTTY ADJUSTABLE ROD HOLDER EXTENDER S459

Provides the option for you to position your Scotty Rod Holder into that perfect fishing fighting location Conveniently position your rod holder closer to you on your kayak or your downrigger to eliminate reaching for your rod Can be used in...

SCOTTY ANCHOR LOCK WITH FLUSH MOUNT S277

Anchor release system for small boats in still-water fishing situations Easy lock and release action allows anchor line adjustments with only one hand Tough construction and roller bearing offers a smooth and quiet operation For use with rope up to...

SCOTTY BACKING PLATE S441

Use the Scotty Backing Plate to add structural support when attaching the Scotty No. 241L or No. 241 Combination Side/Deck Mounts or the No. 244L or 244 Flush Deck Mounts to a thin-walled watercraft Made with super tough, rugged engineering grade...

SCOTTY BAIT BOARD S455

Quickly mount the Bait Board to any Scotty post mount Store all of your fishing favourites with the built-in lure and accessory rack which gives you quick and easy access to everything you need Exterior tray walls let you cut bait and prep lures...

SCOTTY BAITCASTER/SPINNING ROD HOLDER S279

Holds a baitcaster reel in a cushioned cradle and a slot at the front also allows for a spinning reel to be securely held in position Designed with a side mounted flange, which leaves the bottom open accommodating rod trigger grips Pistol grip...

SCOTTY BALL MOUNTING SYSTEM WITH UNIVERSAL MOUNTING PLATE S150

The new Scotty Ball System with Universal Mounting Plate provides a mounting platform for a variety of accessories The ball joint design of the Scotty 150 enables a smooth, full range of motion The corrosion proof construction of this system provides a...

SCOTTY CAMERA MOUNT S135

The Scotty Portable Camera Mount is fully twistable, turnable, rotatable, and best of all, instantly portable Locks down a standard camera or sports cam without needing a special adaptor Fits into all Scotty post mount systems which means we have you...

SCOTTY COAMING GUNNEL CLAMP MOUNT S433

Position your Scotty Rod Holder or any post mount accessory virtually anywhere on the lip of your kayak’s coaming or boat gunnel Built tough from rugged engineering grade nylon, the No. 433 revolutionizes the way you can fish from your sit-in...

SCOTTY CUP HOLDER W/ BULKHEAD GUNNEL MOUNT S310

Keep your beverage safe! Cup Holder with Bulkhead / Gunnel Mount For cans, coffee mugs and insulated sleeves Use the Bulkhead / Gunnel Mount to attach the Cup Holder horizontally or vertically Convenient accessory rack to hang lures and...

SCOTTY CUP HOLDER WITH BUTTON AND POST MOUNTS S311

Cup Holder with Button Mount and Rod Holder Post Mount For cans, coffee mugs and insulated sleeves Easily mount the Cup Holder to any Scotty Rod Holder Mounts on your boat or kayak Use the Bulkhead / Gunnel Mount to attach the Cup Holder...

SCOTTY DOWNRIGGER LOCKING PLATES S3134

Works in conjuction with existing downrigger mounting knobs and padlocks of your choice Suitable for all Scotty tilt-up Electric and Manual Downriggers Manufactured using rugged fiber reinforced engineering grade nylon molded over a robust stainless...

SCOTTY EXTENDED GEAR HEAD ADAPTER S429

Bring your rod closer to you and snap it into place with the Scotty Gear Head Mount Extender Customize the 429 with the Scotty Rod Holder and mount of your choice Comes with 428 Gear Head Mount, 459 Adjustable Rod Holder Extender, and 412 post mount

SCOTTY FENDER RING S327

Use the fender ring to quickly attach a fender to your Scotty Rod Holder Post Mounts Easy to insert and remove Fits all Scotty Post Rod Holder Mounts except for the No. 237 Trigger Lock Inside Diameter of Ring:7/8″ ( No. 241 Side/Deck Mount,...

SCOTTY FLUSH MOUNT BRACKET S244-BK

Sealed base for watertight applications (such as kayak decks) For all Scotty post mount rod holders Dimensions:4” x 2” x 2”Bolting Dimensions:1 5/16” x 3 3/16

SCOTTY GEAR CADDY S452

The Scotty 452 Gear Caddy provides a highly flexible, mobile base to keep tools and tackle organized, secure, and readily available while on the water. With lots of storage locations in a range of useful sizes, it offers easy, intuitive access to...

SCOTTY GIMBAL ADAPTER WITH GEAR HEAD MOUNT S453

The Scotty Gimbal Mount Adapter has a quick and easy drop and lock system transforming the existing Gimbal Mount on your watercraft into a fully adjustable mounting point for post mounted Scotty rod holders and accessories Complete with the...

SCOTTY GIMBAL MOUNT ROD HOLDER ADAPTER S253

Allows the use and attachment of Scotty Rod Holders with factory installed flushmounted rod holders Strong, durable and built to last

SCOTTY KAYAK FISHING STARTER PACK S111

Fishing essentials for outfitting your Kayak. The Kayak Starter Pack includes a 282 Baitcaster Spinning Rod Holder with Gear Head & Track-Holds a bait caster reel securely in the cushioned cradle. 438 Gear Head Track Adapter-slide the Gear Head into...

SCOTTY KNIFE SHARPENER S990

The ultimate sharpening device that is simple to use Hold the sharpener in one hand and draw your knife through the sharpening blades A razor sharp knife blade in seconds every time Tungsten carbide blades may be rotated to 8 different positions to...

SCOTTY LOCKING COMBO SIDE/DECK MOUNTING BRACKET S241L

Allows mounting on a flat surface or on the side of a gunnel or transom For all Scotty post mount rod holders To use the new Scotty “lock-down” mount system simply choose the best direction to fish from and insert the rod holder or...

SCOTTY LOCKING FLUSH DECK MOUNTING BRACKET S244L

For all Scotty post mount rod holders To use the new Scotty “lock-down” mount system, simply choose the best direction to fish from and insert the rod holder or accessory, pushing the post straight down into the mount Dimensions:4” x...

SCOTTY LOW PROFILE TRACK 8" S440-BK-8

The 440-BK-8 Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty Rod Holders and...

SCOTTY MINI DOUBLE ENDED ROD HOLDER EXTENDER S459M

This is the perfect adapter to lift your Scotty Rod Holder off of your deck or to find that absolutely perfect fishing position The mini extender adds an extra 5 1/2″ of length to your rod holder post and will greatly improve a difficult or...

SCOTTY MINI POWER GRIP PLUS W 18IN LEADER CANNONBALL SNAP S1181

Mini Power Grip Plus with 18″ Leader and Cannonball Snap Fishing line is gripped between the soft pads and variable release tension is attained by moving the line in or out of the jaws The “tension adjuster” doubles the holding power...